Dorel Juvenile Group announces voluntary recall of certain Maxi-Cosi & Safety 1st Infant Car Seats and bases sold in the U.S. & Canada.
U.S. Models Affected:
Maxi-Cosi Coral XP: Model # IC313, manufactured between May 1, 2020 – Feb 28, 2023
Maxi-Cosi Mico XP: Model # IC336 & IC338, manufactured between September 1, 2020 – Feb 28, 2023
Maxi-Cosi Mico XP Max: Model # IC337, manufactured between January 1, 2021 – Feb 28, 2023
Maxi-Cosi Mico Luxe+: Model # IC370, manufactured between January 1, 2022 – Feb 28, 2023
Infant Bases (spare bases that were sold separately): Model # IC335, manufactured between May 1, 2020 – Feb 28, 2023
Safety 1st onBoard 35 SecureTech: Model # IC351, manufactured between May 1, 2020 – Feb 28, 2023
Note: Only the OnBoard 35 models sold with the “SecureTech” bases are affected by this recall. All other onBoard infant car seat models with typical LATCH attachments are NOT recalled.
Some models were purchased as a Travel System which included car seat + base + stroller. Only the car seat base is recalled.
Maxi-Cosi GIA XP Travel System with MICO XP Carseat: Model # TR416 l
Maxi-Cosi ZELIA 2 MAX Travel System MXP: Model #TR427
Maxi-Cosi TAYLA Travel System with MICO XP Carseat: Model # TR428
Maxi-Cosi ADORRA Travel System with MICO XP Carseat: Model # TR430
Maxi-Cosi TAYLA XP Travel System with CORAL XP Carseat: Model # TR433
Maxi-Cosi MARA XT Travel System with CORAL XP Carseat: Model # TR434
🍁 Canadian Models Affected:
CAN MAXI COSI CORAL XP INFANT CAR SEAT #22304
CAN MICO XP MAX CAR SEAT #22321
CAN MAXI COSI MICO XP MAX #22334
CAN MAXI COSI CORAL XP BASE #22524
CAN MAXI COSI MICO XP BASE #22526
CAN MAXI COSI LILA CP TRAVEL SYSTEM #01371
The self-retracting lower LATCH anchor mechanism in the base can experience resistance during normal activation causing deformation of the feature that is intended to move the retractor mechanism into the fully locked position. Once the feature is deformed, the lower anchors in the base may not keep the base securely installed to the vehicle.
Owners are advised to secure their recalled infant car seat bases with the vehicle seatbelt, or install the carrier directly without using the base, until a replacement base arrives.
Installation with seatbelt: These infant car seat bases are easy to install properly with a seatbelt because they have a belt-tensioning lockoff. You don’t have to put a lot of effort into getting the seatbelt super tight; just pull the seatbelt reasonably snug and close the lockoff over it. The lockoff will apply the force needed to tighten the seatbelt on the base. Check that the base moves less than 1″ when you test for tightness at the beltpath.
Dorel will mail a replacement base to *registered owners*, free of charge.
You may register your car seat at:
Owner notification letters are expected to be mailed April 7, 2023. Owners may contact Dorel customer service at 1-877-657-9546 or by email at [email protected].