Recaro Recalls Certain ProRide and Performance Ride Convertible Seats

FacebooktwittermailFacebooktwittermail

Today Recaro Child Safety announced a recall of convertible seats made between April 9, 2010 and June 9, 2015.  Over 173,000 carseats are affected.  These child restraints do not fully comply with the system integrity requirements of Federal Motor Vehicle Safety Standard (FMVSS) 213. “When the affected child seats are installed using the top tether, the top portion of the restraint can crack and allow the top tether to separate from the restraint. As such, these seats fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 213, “Child Restraint Systems.” In the event of a crash, the child restraint could fail to protect the child from contacting interior surfaces of the vehicle, increasing the risk of injury.

Recaro submitted a petition for an exemption of non-compliance in July, 2014, and the NHTSA denied Recaro’s petition in July, 2015, after a public comment period in November, 2014.  “NHTSA’S Decision: In consideration of the foregoing, NHTSA has decided that the ProRIDE and Performance RIDE’s noncompliance poses a risk to safety and is therefore not inconsequential. Recaro has not met its burden of persuasion that the FMVSS No. 213 noncompliance identified in Recaro’s noncompliance information report is inconsequential to motor vehicle safety. Accordingly, Recaro’s petition is hereby denied and Recaro is obligated to provide notification of, and a remedy for, that noncompliance under 49 U.S.C. 30118 and 30120.”  The NHTSA also has recall related information.

 

Recaro ProRIDE convertible

Recaro ProRIDE convertible

Recaro Performance RIDE convertible

Recaro Performance RIDE convertible

What’s the Fix:

The remedy kit consists of a load limiting strap and instructions on how to install it on your carseat.

If you are a ProRIDE or Performance RIDE owner currently using a now-recalled seat, here’s our advice:

  • If you are using your ProRIDE or Performance RIDE convertible in the rear-facing position – you still need to contact Recaro for the recall fix, but the issue with the tether potentially separating from the shell doesn’t apply in your situation because that’s only a concern when the seat is installed forward-facing.
  • If you are using your ProRIDE or Performance RIDE convertible in the forward-facing position – consider whether or not your child could actually use this seat in the rear-facing position until you are able to obtain the recall fix kit. If your child weighs less than the rear-facing weight limit (which is either 35 or 40 lbs., depending on when your seat was made) and your child has a seated height (measure bottom of tush to top of head) of less than 22.5 inches tall – he or she can still use the seat rear-facing and you avoid the potential issue with the tether.
  • If you are using your ProRIDE or Performance RIDE convertible in the forward-facing position and using it rear-facing isn’t an option, please read Recaro’s statement below:

Recaro USA has issued the following statement:

What You Should Do:

During applicable tests conducted by NHTSA, the dynamic test scores that directly affect the child were still within the limits allowed by the FMVSS 213 standard, hence, you should continue to use your RECARO ProRIDE or Performance RIDE as instructed in your manual. You may check the model number and manufacture date on your child restraint to see if it is affected by this notice. You can find the model number and manufacture date on a white label on the left side of your child restraint. If your model is affected please email [email protected] or call our customer service team at 1-866-628-4750 to obtain a repair kit. The repair kit will consist of a load limiting strap and instructions on how to install it in a vehicle.

Look for model numbers of 332.01.AK21, 332.01.KAEC, 332.01.KAEG, 332.01.KK91, 332.01.MC11, 332.01.MJ15, 332.01.QA56, 332.01.QA9N, 332.01.QQ11, 332.01.QQ14, 332.01.QQ95, 333.01.CHIL, 333.01.HABB, 333.01.HAZE, 333.01.JEBB, 333.01.JETT, 333.01.KNGT, 333.01.MABB, 333.01.MARI, 333.01.MNGT, 333.01.PLBB, 333.01.PLUM, 333.01.REBB, 333.01.REDD, 333.01.ROBB, 333.01.ROSE, 333.01.SABB, 333.01.SAPH, 333.01.SLBB, 333.01.SLTE, 333.01.VIBB, 333.01.VIBE and manufacturing dates between April 9, 2010 – June 9, 2015.

You can also order a fix kit directly by visiting recaropromotion.com/RIDErecallSept2015. Please be prepared to enter your model number and manufacture date of your child restraint.

One Response

  1. Denise October 8, 2015