Mythbusting: You Can Damage Your Car Seat by Installing It Too Tightly

FacebooktwittermailFacebooktwittermail

Myth: A rock-solid, shake-the-car installation is not ideal and you could break your carseat or damage the seatbelt

Is it bad or wrong to install your car seat so tightly that you shake the whole car when you’re testing to make sure it’s tight? That question comes up frequently so we wanted to explore the issue – look at the facts, talk to car seat engineers, and set the record straight once and for all.

First, a little background info – when child restraint systems are crash tested in a lab, the tension on the belt webbing has to measure between 53.5 N (newtons) and 67 N. That tension is measured by a load cell device placed on the webbing. This is done to maintain repeatability between tests. The tension range was chosen because it represents the average tightness achieved by parents in the field.

In the real world, no one expects parents and caregivers to measure the tension on the seatbelt or LATCH strap that is securing their car seat. CPS Technicians are taught that a car seat is properly installed if it moves less than 1” from side-to-side and front-to-back when you check for tightness at the beltpath.

But is it possible to install your car seat too tightly? To the point of it being a detriment instead of a benefit?

In most cases, there is no such thing as too tight – only too loose. If you’re just using typical human strength and maybe a few installation tricks like getting behind a rear-facing car seat or using the reclining seatback trick, you do not have to worry about getting the seatbelt or LATCH strap too tight. Car seats and seatbelts are not delicate objects that are going to be compromised by a really tight installation. You also don’t need to worry that you’re going to damage your car seat if you put your weight into it while trying to install it tightly. These products are designed to withstand crash forces!

Remember the <not technically accurate but simple concept used to make a point> weight x speed equation that we use to teach parents and caregivers how much restraining force is needed to keep their child restrained in a crash? Guess what? Your car seat is designed to withstand 1,200 lbs. of force or more in a crash! And the seatbelts and retractors in your vehicle are designed to restrain a 200 lb. adult in a 35 mph crash. That’s 7,000 lbs. of restraining force! Even an Olympic weightlifter cannot install a car seat with 1200 lbs. of force!

You don’t need to worry that somehow your very tight installation or putting your knee in your car seat while installing is somehow going to hurt your car seat or your vehicle. If you could damage a car seat simply by kneeling in it for 10 seconds while trying to tighten the seatbelt, then I don’t like its chances of maintaining structural integrity in a crash. Crash forces are intense and car seats are designed and engineered to be TOUGH, throughout the lifespan of that product.

FACT: The tighter you can couple the car seat to the vehicle, the better. This is why Rigid LATCH/ISOFIX attachments are so beneficial!

With that said, if you’re installing a car seat that has an integrated belt-tensioning feature –  like a Britax with ClickTight, Graco with SnugLock, or Chicco with SuperCinch, you need to follow the manufacturer’s directions and guidance for proper installation.

For car seats that don’t have a built-in mechanical advantage, if you can use a few tricks or installation techniques and achieve a really solid installation, that’s great. However, if you’re fighting with the install and the best you can achieve is just a little bit of side-to-side or front-to-back movement and it’s not more than 1″ of movement, that’s perfectly okay too. It’s not always possible to get a rock-solid install but if you can – there is certainly nothing bad or wrong with that.

One of my vehicles has very stiff leather seats and I almost always need to put a knee in a forward-facing car seat to get an acceptable install in that vehicle. Occasionally, I will need to put a knee in the car seat and also use the reclining seatback trick. These are easy things that I can do quickly, and it sure beats wrestling with a challenging installation for 20 minutes.

Ultimately, you always want to read and follow the car seat manufacturer’s recommendations. There are situations where getting the seatbelt too tight will prevent you from closing a lockoff because there is too much tension on the belt.

There are also situations where a LATCH belt with hook connectors is so tight that you can’t get enough slack in the belt to loosen it when you have to take it out. Tip: if this happens on a vehicle seat that reclines – recline the vehicle seat back then apply downward pressure to the car seat or base and that should introduce enough slack to allow you to loosen the LATCH belt.

Obviously, in these cases, you have a compelling circumstance (key words) and you may need to lighten up a little on your regular installation technique.

Bottom line: Unless there is some compelling reason not to, install the car seat as tight as you can with reasonable effort (more key words) but don’t feel bad if you can’t get it rock-solid. On the flip side, it’s not bad or wrong if you can get that sucker installed like it’s part of the car with a reasonable amount of effort.

We’re going to say that this Myth is PLAUSIBLE simply because there are many car seats on the market that have some sort of belt-tensioning mechanical advantage feature and if you go overboard while using a mechanical advantage, that could potentially (yet another key word) create issues.

For car seats that lack any type of belt-tensioning mechanical advantage feature, this myth is definitely BUSTED.

8 Comments

  1. Brooke Hutson February 23, 2024
    • Kecia February 25, 2024
  2. Emma March 18, 2023
    • Kecia March 18, 2023
  3. Diane March 2, 2017
    • Kecia March 3, 2017
  4. Emily February 27, 2017
    • Kecia February 27, 2017

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.