Rear-Facing Space Comparison: Britax G4 Convertibles vs. New Britax ClickTight Convertibles

FacebooktwittermailFacebooktwittermail

Today we wrapped up the 10th annual Kidz in Motion (KIM) Conference in beautiful, sunny, New Mexico. It was another great conference and a good time was had by all. While I was here I had the opportunity to do some comparison testing of the current G4 Britax convertible models and the brand new Britax ClickTight convertibles that now available for pre-order. I was particularly interested in seeing how the seats compared side-by-side when installed rear-facing.

The vehicle used for this comparison was a 2014 Dodge Charger. Both the driver seat and the front passenger seat were set in the same positions at the same recline angle in order to accurately compare how much room each seat took up while rear-facing. On one side we installed the Britax Boulevard G4, on the other side we installed the new Britax Boulevard ClickTight. Both seats were installed with seatbelt.

Britax Blvd G4 and Blvd CT

Since the new ClickTight convertible models have 7 recline positions that can be used to achieve an appropriate recline, I took several different measurements so you can have an idea of how these new seats will fit rear-facing in backseats as compared with the Britax G4 convertible models which have a reputation for fitting exceptionally well in tight spaces.

Installed at a recline angle appropriate for a newborn or young baby with the headrest in a low height setting- the Boulevard ClickTight model took up approximately 3/4 of an inch (.75″) more room than the G4 model did. That’s still better (space wise) than most other convertibles currently on the market.

Britax Blvd CT and Blvd G4  Blvd ClickTight - recline angle closeup

Installed at a angle that was more upright (which would be consistent with the overall comfort of a toddler or older rear-facing child) with the headrest fully extended, the ClickTight model took up slightly less room than the G4 model did. And I do mean slightly – the difference was only 1/4 of an inch (.25″).

Britax Blvd CT - installed RF upright  Britax CT convertible - more upright install angle 

Installed at an angle that was bolt upright – suitable for older children who really don’t need any recline at all (basically it’s how they would be seated if they were forward-facing). The ClickTight model took up a whopping 3″ LESS space than the G4 model did! I was really shocked by that because as I stated earlier, the G4 convertible models are already known for being great seats for tight spaces. In reality, most parents probably won’t install the CT models this upright rear-facing because it is VERY upright. But I asked the Britax engineer how he felt about it and we both agreed that there is no such thing as “too upright” for older RF kids who don’t have any special healthcare needs. If your older kid is comfortable sitting at 20 degrees from vertical – Britax has no issue with that.

Britax Blvd CT - max upright position  Britax CT - angle indicator max upright

The new ClickTight models offer a wide range of recline angles and these options create more potential for finding a suitable recline angle and taking up less space in the vehicle. Children under 6 months old generally need more recline but as they grow and gain good head and neck control – the seat can be installed more upright. The recline angle indicator on these new models is excellent and pretty self-explanatory. For rear-facing, the angle indicator should be in the light blue zone for younger babies and in the dark blue zone for older babies, toddlers and preschool age kids who still ride rear-facing.

I took a few pictures of the Blvd ClickTight forward-facing as well. I just set the seat in the vehicle – I didn’t bother to install it because we were short on time but this will give everyone a general idea of what the Blvd CT looks like forward-facing.

Britax Blvd CT FF  Britax Blvd CT FF  Britax Blvd CT FF

Britax Blvd CT FF

Last but not least – here are a few measurement pics since the ones I took of the Advocate model at the launch event in NYC weren’t 100% accurate because those seats were still prototypes. The top harness slots on the Blvd CT and Advocate CT models measure about 19″ tall and the overall internal height with the headrest fully extended is about 29″. The Marathon CT is a little shorter both in terms of overall height and top harness slots.

Britax Blvd CT top harness height Britax Advocate overall internal shell height

 

For more info see our comprehensive review of the Britax Boulevard ClickTight posted here:

Britax Boulevard ClickTight Convertible Review – Sometimes Things Just Click

23 Comments

  1. Saul April 6, 2017
  2. Telina November 13, 2015
    • Kecia November 14, 2015
  3. megan February 11, 2015
  4. CPSDarren October 7, 2014
  5. YG October 1, 2014
  6. EmmaL September 5, 2014
  7. Kecia September 1, 2014
  8. Kecia September 1, 2014
  9. Mick August 31, 2014
  10. wagonlover August 31, 2014
  11. Alyssa August 31, 2014
  12. CPSDarren August 30, 2014
  13. Alyssa August 29, 2014
  14. Mary_Ann August 29, 2014
  15. ketchupqueen August 28, 2014
  16. Danielle T August 28, 2014
  17. Kecia August 28, 2014
  18. Kappy Nichols August 28, 2014
  19. Danielle T August 28, 2014
  20. Kecia August 28, 2014
  21. jjordan August 28, 2014
  22. jjordan August 28, 2014